Steering Column to Firewall Grommet for HOLDEN FE FC FB EK EJ EH HD HR

Steering Column to Firewall Grommet for HOLDEN FE FC FB EK EJ EH HD HR

Replacement steering column to firewall rubber grommet for Holden FE, FC, FB, EK, EJ, EH, HD and HR models. Designed to fit around the steering column where it passes through the vehicle's firewall, helping seal the opening between the engine bay and passenger cabin.

Over time, original firewall grommets can become hardened, cracked, split or perished due to age, heat and general wear. A damaged or missing grommet can leave gaps around the steering column, allowing dust, water, engine bay fumes and unwanted noise to enter the cabin.

This replacement rubber grommet helps restore the protective seal around the steering column while providing a neat finish to the firewall opening. Ideal for steering column repairs, firewall refurbishments and classic Holden restorations.

Features:

• Replacement steering column to firewall rubber grommet for early Holden models
• Suitable for Holden FE, FC, FB, EK, EJ, EH, HD and HR
• Designed to fit around the steering column where it passes through the firewall
• Helps seal the opening between the engine bay and passenger cabin
• Helps reduce dust, water, engine bay fumes and unwanted noise entering the cabin
• Provides a protective barrier around the steering column opening
• Helps restore a neat finish to the firewall area
• Replaces cracked, hardened, split or perished original grommets
• Ideal for firewall repairs and classic Holden restorations

Vehicle Compatibility:

• Holden FE (1956 – 1958)
• Holden FC (1958 – 1960)
• Holden FB (1960 – 1961)
• Holden EK (1961 – 1962)
• Holden EJ (1962 – 1963)
• Holden EH (1963 – 1965)
• Holden HD (1965 – 1966)
• Holden HR (1966 – 1968)

Product Details:

• Product Type: Steering Column to Firewall Grommet
• Material: Rubber
• Position: Steering Column Firewall Opening
• Application: Steering Column Pass-Through Seal
• Vehicle Make: Holden
• Models: FE, FC, FB, EK, EJ, EH, HD and HR
• Function: Seals and Protects the Steering Column Firewall Opening
• Quantity: 1 Grommet

Installation Notes:

Before installation, inspect the existing steering column firewall grommet for cracks, splits, deterioration or missing sections.

Carefully remove the original grommet from the firewall opening. Depending on the steering column configuration, some steering column components may need to be removed or disconnected to allow the replacement grommet to be fitted.

Before disconnecting any steering components, ensure the steering wheel and front wheels are correctly positioned and follow the appropriate vehicle workshop procedures.

Clean the firewall opening thoroughly, removing dirt, old rubber, adhesive residue or debris that may prevent the replacement grommet from seating correctly.

Inspect the surrounding firewall metal for rust, corrosion, sharp edges or damage. Repair any affected areas before installing the new grommet.

Compare the replacement rubber grommet with the original to confirm the correct shape, dimensions, steering column opening and firewall mounting arrangement.

Carefully position the replacement grommet around the steering column and into the firewall opening, ensuring the rubber is correctly seated against the surrounding metal.

Make sure the grommet sits evenly without twisting, bunching or excessive stretching.

Refit any steering column components removed during installation, following the correct workshop procedures and tightening specifications.

Once installed, check that the steering column moves freely through its normal operating range without rubbing, binding or interference from the replacement grommet.

Inspect the firewall opening to ensure the grommet is securely positioned and provides an even seal around the steering column.

Installation Tip: Inspect the condition of the surrounding firewall seals and steering column mounting components while fitting the replacement grommet. Damaged or incorrectly positioned components can affect sealing and steering column clearance.

Please Note:

This listing is for one steering column to firewall rubber grommet only.

Steering column components, mounting brackets, steering couplings and additional hardware are not included unless otherwise specified.

Suitable for Holden FE, FC, FB, EK, EJ, EH, HD and HR models with compatible original-style steering column and firewall arrangements.

Important: Steering column configurations and firewall openings may vary depending on the vehicle's model, transmission type, factory equipment and previous modifications.

Vehicles fitted with aftermarket steering columns, modified steering systems or engine conversions may require additional fitting checks.

The replacement grommet must not restrict steering column movement or interfere with any steering components.

Please compare the original grommet profile, steering column diameter and firewall opening dimensions with the product images before ordering to confirm correct fitment.