Right Hand Front Door Seal for HOLDEN LX UC TORANA COUPE

Right Hand Front Door Seal for HOLDEN LX UC TORANA COUPE

Replacement right hand front door rubber seal for Holden LX and UC Torana Coupe (Hatchback) models. Designed to fit around the front driver's door sealing area, helping create a weather-resistant seal between the door and surrounding bodywork.

Over time, original door seals can become hardened, cracked, flattened or perished due to age, sunlight and general wear. Worn door rubbers can allow water, dust and wind noise to enter the cabin, particularly around the door edges and corners.

This replacement right hand front door seal helps restore the sealing function of the driver's door while providing cushioning between the door and body. Ideal for replacing deteriorated original rubbers during door repairs, panel resprays and classic Holden Torana restorations.

Features:

• Replacement right hand front door rubber seal for Holden Torana LX and UC
• Specifically suited to Coupe (Hatchback) body styles
• Designed for the right hand front driver's door
• Helps create a weather-resistant seal between the door and vehicle body
• Helps reduce water leaks, wind noise and dust entering the cabin
• Provides cushioning between the door and surrounding bodywork
• Helps prevent direct contact between the door and adjacent body surfaces
• Replaces cracked, flattened, hardened or perished original door seals
• Ideal for door repairs, bodywork and classic Torana restorations

Vehicle Compatibility:

• Holden Torana LX Coupe / Hatchback (1976 – 1978)
• Holden Torana UC Coupe / Hatchback (1978 – 1980)

Product Details:

• Product Type: Front Door Rubber Seal
• Material: Rubber
• Position: Right Hand Front Door
• Side: Right Hand (RH) / Driver's Side
• Application: Front Door Weather Sealing
• Body Style: Coupe / Hatchback
• Vehicle Make: Holden
• Models: Torana LX and UC
• Function: Helps Seal the Front Door Against Water, Dust and Wind Noise

Common Signs of a Worn Door Seal:

• Water entering the cabin around the driver's door
• Increased wind noise while driving
• Dust entering around the door opening
• Rubber becoming hard, brittle or cracked
• Flattened sections that no longer seal against the body
• Sections of the original rubber splitting or pulling away
• Visible gaps between the closed door and surrounding seal

Installation Notes:

Before installation, inspect the existing right hand front door seal for cracks, splits, flattening, shrinkage or other signs of deterioration.

Carefully remove the original door rubber, noting its position, orientation and attachment method around the door opening.

Remove any remaining adhesive, old rubber fragments, dirt or debris from the sealing area. Take care not to damage the surrounding paintwork or interior trim.

Inspect the door edges and surrounding bodywork for rust, corrosion, damaged paint or previous repairs. Pay particular attention to the lower door area and corners where moisture may collect.

Repair any damaged metal or paintwork before fitting the replacement rubber seal. Ensure freshly painted surfaces are fully cured before installation.

Compare the replacement seal with the original to confirm the correct profile, length, shape and fitting arrangement.

Position the new rubber seal around the right hand front door sealing area, following the original sealing path.

Work gradually around the door opening, ensuring the rubber sits evenly through the corners without twisting, stretching or bunching.

Where required by the seal's attachment method, use a suitable automotive rubber weatherstrip adhesive. Follow the adhesive manufacturer's preparation and curing instructions.

Once fitted, carefully close the driver's door and check that the rubber compresses evenly against the surrounding bodywork.

Check that the door closes and latches correctly without excessive force. Inspect the seal for sections that may be folded, pinched or incorrectly positioned.

After installation, carry out a controlled water test around the door opening to check for leaks. Inspect the surrounding interior trim and floor area for moisture entry.

Installation Tip: New door seals can initially feel firmer than old, compressed rubbers. Allow the replacement seal time to settle into position and check its alignment before adjusting the door hinges or striker.

Please Note:

This listing is for one right hand front door rubber seal only.

Right Hand (RH) refers to the driver's side of an Australian right hand drive vehicle when viewed from inside the vehicle facing forward.

Left hand front door seals, hatch seals, window seals, bailey channels and additional mounting accessories are not included unless otherwise specified.

Suitable for Holden Torana LX and UC Coupe / Hatchback models only.

Important: This seal is specifically for the right hand front door of the Coupe / Hatchback body style and is not suitable for Torana Sedan models.

Coupe and Sedan door configurations differ, so their door seals should not be assumed to be interchangeable.

Door seal profiles and attachment methods may vary depending on previous repairs, replacement doors or modifications to the vehicle.

Please compare the original rubber profile, door configuration and sealing arrangement with the product images before ordering to confirm correct fitment.