Rear Windscreen Seal for FORD FALCON XA XB XC HARDTOP COUPE
Rear Windscreen Seal for FORD FALCON XA XB XC HARDTOP COUPE
Replacement rear windscreen rubber seal for Ford Falcon XA, XB and XC Hardtop Coupe models. Designed to fit around the rear windscreen glass, helping create a weather-resistant seal between the glass and the surrounding body opening.
Over time, original rear windscreen seals can become hardened, cracked, shrunken or perished due to age, sunlight and exposure to the elements. Deteriorated seals can allow water to enter around the rear glass, potentially causing moisture damage, rust and corrosion around the window opening, parcel shelf and surrounding interior panels.
This replacement rear windscreen rubber seal helps restore the sealing function of the rear glass while maintaining a neat finish around the window opening. Ideal for replacing worn original rubbers during rear windscreen repairs, panel resprays and classic Ford Falcon Hardtop Coupe restorations.
Features:
- Replacement rear windscreen rubber seal for Ford Falcon XA, XB and XC
- Specifically suited to Hardtop Coupe body styles
- Designed to fit around the rear windscreen glass and body opening
- Helps create a weather-resistant seal between the rear glass and vehicle body
- Helps reduce water leaks, dust and wind noise entering the cabin
- Helps protect the rear windscreen opening from moisture entry
- Replaces cracked, hardened, shrunken or perished original windscreen seals
- Provides a neat finish around the rear windscreen
- Ideal for rear glass replacement, body repairs and classic Ford Falcon restorations
Vehicle Compatibility:
- Ford Falcon XA Hardtop Coupe (1972 – 1973)
- Ford Falcon XB Hardtop Coupe (1973 – 1976)
- Ford Falcon XC Hardtop Coupe (1976 – 1978)
Product Details:
- Product Type: Rear Windscreen Rubber Seal
- Material: Rubber
- Position: Rear Windscreen
- Application: Rear Windscreen Glass to Body Seal
- Body Style: Hardtop Coupe
- Vehicle Make: Ford
- Models: Falcon XA, XB and XC
- Function: Helps Seal the Rear Windscreen Against Water, Dust and Air Entry
- Quantity: 1 Rear Windscreen Seal
Installation Notes:
Before installation, inspect the existing rear windscreen rubber seal for cracks, hardening, shrinkage, splits or deterioration around the glass and body opening.
Carefully remove the rear windscreen glass and original rubber seal using suitable automotive glass removal methods. Rear windscreens can be fragile, particularly on older vehicles, so support the glass correctly during removal.
Remove any remaining rubber fragments, old sealant, dirt or debris from the rear windscreen opening.
Thoroughly inspect the surrounding metal window channel for rust, corrosion, damaged paint or previous repairs. Pay particular attention to the lower corners and bottom section of the rear windscreen opening, where moisture may collect.
Repair any rust or damaged metal before installing the replacement seal. Ensure repaired and painted surfaces are properly finished and fully cured before refitting the glass.
Compare the replacement rubber seal with the original to confirm the correct profile, overall shape and fitting arrangement.
Check the condition of the rear windscreen glass, particularly around the edges, for chips or cracks that could affect installation.
Fit the replacement rubber seal to the rear windscreen glass or body opening according to the original fitting arrangement and the appropriate workshop procedure.
Use suitable automotive glass installation tools and an appropriate lubricant where required to assist with positioning the seal without damaging the rubber or glass.
Carefully position the rear windscreen into the body opening, ensuring the rubber sits evenly around the glass and engages correctly with the surrounding mounting flange.
Avoid excessive pressure on the glass, particularly around the corners and edges.
Once installed, inspect the rubber seal around the complete perimeter of the rear windscreen. Ensure there are no twisted sections, folds or visible gaps.
Where required by the original installation method, use a compatible automotive windscreen sealing compound suitable for rubber-mounted glass.
After installation, carry out a controlled water test around the rear windscreen to check for leaks. Inspect the parcel shelf, rear interior trim and surrounding window opening for signs of moisture entry.
Installation Tip: Check the rear windscreen channel carefully before refitting the glass. Rust beneath an old windscreen rubber can remain hidden until the glass is removed. Repairing these areas before installing the new seal can help prevent future water leaks and corrosion.
Please Note:
This listing is for one rear windscreen rubber seal only.
Rear windscreen glass, decorative mouldings, chrome trims, retaining clips, installation tools and sealing compounds are not included unless otherwise specified.
Suitable for Ford Falcon XA, XB and XC Hardtop Coupe models only.
Important: This rear windscreen seal is intended for the Hardtop Coupe body style and is not suitable for Sedan, Wagon, Ute or Panel Van models.
Rear windscreen rubber profiles and decorative trim arrangements may vary depending on factory specifications, previous glass replacements and vehicle modifications.
If your vehicle is fitted with decorative rear windscreen mouldings, confirm that the replacement seal is compatible with the existing moulding arrangement before ordering.
Please compare the original rear windscreen rubber profile, glass shape and body opening with the product images before ordering to confirm correct fitment.

















