Outer Right Rear Door Seal for HOLDEN FE FC FB EK SEDAN OR WAGON

Outer Right Rear Door Seal for HOLDEN FE FC FB EK SEDAN OR WAGON

Replacement outer right rear door rubber seal for Holden FE, FC, FB and EK Sedan and Wagon models. Designed to fit around the outer sealing area of the right-hand rear door, helping create a weather-resistant seal between the door and surrounding vehicle body.

Over time, original door seals can become hardened, cracked, flattened or perished due to age, exposure to the elements and general wear. Deteriorated seals can allow water, dust and wind noise to enter the cabin, particularly around the door edges and corners.

This replacement rubber seal helps restore the sealing function of the right rear door while providing a protective barrier against moisture and road dust. Ideal for replacing worn original door rubbers during body repairs, door restoration or a complete classic Holden rebuild.

Features:

• Replacement outer right rear door rubber seal for Holden FE, FC, FB and EK
• Suitable for Sedan and Wagon body styles
• Designed for the right-hand rear passenger door
• Helps create a weather-resistant seal between the door and vehicle body
• Helps reduce water leaks, wind noise and dust entering the cabin
• Provides cushioning between the door and surrounding bodywork
• Helps prevent direct contact between the door and adjacent body surfaces
• Replaces cracked, flattened, hardened or perished original door seals
• Ideal for door repairs and classic Holden restorations

Vehicle Compatibility:

• Holden FE Sedan (1956 – 1958)
• Holden FE Wagon (1956 – 1958)
• Holden FC Sedan (1958 – 1960)
• Holden FC Wagon (1958 – 1960)
• Holden FB Sedan (1960 – 1961)
• Holden FB Wagon (1960 – 1961)
• Holden EK Sedan (1961 – 1962)
• Holden EK Wagon (1961 – 1962)

Product Details:

• Product Type: Outer Rear Door Rubber Seal
• Material: Rubber
• Position: Right Rear Door
• Side: Right Hand (RH)
• Application: Outer Rear Door Weather Sealing
• Body Styles: Sedan and Wagon
• Vehicle Make: Holden
• Models: FE, FC, FB and EK
• Quantity: 1 Right Rear Door Seal

Installation Notes:

Before installation, inspect the existing right rear door seal for cracks, flattening, hardening, splits or missing sections.

Carefully remove the original rubber seal, noting its position, orientation and attachment method around the door opening.

Remove any remaining adhesive, old rubber fragments, dirt or debris from the sealing area. Take care not to damage the surrounding paintwork.

Inspect the door edges and surrounding bodywork for rust, corrosion, damaged paint or deterioration. Repair any affected areas before fitting the replacement seal.

Compare the new rubber seal with the original to confirm the correct profile, dimensions and fitting arrangement.

Position the replacement seal around the right rear door sealing area, starting at an appropriate reference point and working gradually around the opening.

Ensure the rubber follows the original sealing path and sits evenly around the corners without twisting, stretching or bunching.

Use a suitable automotive rubber weatherstrip adhesive where required by the seal's fitting arrangement. Follow the adhesive manufacturer's preparation and curing instructions.

Once fitted, carefully close the rear door and check that the rubber compresses evenly against the surrounding bodywork.

Inspect the door alignment and ensure the door closes and latches correctly without excessive force.

After installation, carry out a water test to check for leaks around the door opening. Inspect the seal for gaps or sections that may require adjustment.

Installation Tip: New door rubbers may initially be firmer than the original worn seals. Allow the rubber to settle into position and check door alignment before making adjustments to the hinges or striker.

Please Note:

This listing is for one outer right rear door rubber seal only.

Right Hand (RH) refers to the driver's side of an Australian right-hand-drive vehicle when viewed from inside the vehicle facing forward.

Front door seals, left rear door seals, inner door seals and additional mounting accessories are not included unless otherwise specified.

Suitable for Holden FE, FC, FB and EK Sedan and Wagon models with compatible original-style rear door sealing arrangements.

Important: This seal is specifically for the outer right rear door and is not interchangeable with the front door or left rear door seal unless separately confirmed.

Door seal profiles, attachment methods and door opening dimensions may vary depending on the vehicle's model, body style and previous modifications.

Please compare the original rubber profile, door configuration and sealing arrangement with the product images before ordering to confirm correct fitment.