UNIVERSAL IN-LINE RADIATOR FILTER - 1 1/2" - 38MM

UNIVERSAL IN-LINE RADIATOR FILTER - 1 1/2" - 38MM

The Automotive inline Coolant Filter

Have particles such as these floating around in your coolant system?

• Silastic
• Gasket Pieces
• Sludge
• Loose particles from chemical washing
• Engine debris
• Corrosion artifacts

All of these result in clogging the fine tubes which comprise your radiator core and over time block your radiator.

SAVE your radiator from blockages by installing this in-line radiator filter in your top radiator hose. 

1. Cut 50mm (2") out of the top radiator hose in the most suitable straight position.

2. Fit filter to hose withthe end marked 'OUT' nearest to the radiator.

3. Tighten clamps and refill radiator. (Detailed instructions included inside)

• Use coarse filter for the first fortnight, then change to the fine filter
• Clean every 200km for the first few times, then every 1,000km.