1986-87 Grand National with Factory Air Gen IV SureFit™ Complete Kit

The Gen IV is Vintage Air's most powerful and intelligent climate control system. The Gen IV uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments.Additional features include variable blower speed and dash/floor/defrost blend.**Complete kits include everything in the evaporator kit, plus all under-hood components such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware and installation instructions.This complete kit was designed for the 1986-87 Regal Grand National with factory air. Some of the kits listed will fit other years and trims such as the T-type, Sport Coupe, etc.• The Evaporator kit can be utilized for all Regal trims. The new electronic control panel will fit all Regal trims as well and is included in the Evaporator kit.• There are two options for the Condenser Kit (Turbo and Non-Turbo). If your compressor is mounted on the driver’s side of the vehicle, use the Turbo Condenser kit. If the compressor is located on the Passenger’s side of the vehicle, use the Non-Turbo Condenser kit option.• There are two Hose kit options, the Standard hose kit and the Modified hose kit. The Standard hose kit will only fit 1986-87 Grand National and T-type. The hose lengths and fittings are specific for these years and trim. For other trims, use the Modified hose kit, which will allow the A/C hoses to be cut to length and fittings to be clocked to your needs.• At this time, there is only one compressor bracket kit available for the Buick Regal, which is designed to only fit the 1986-87 Grand National and T-type. This bracket kit was designed using a 7B10 compressor. This compact compressor was used due to the tight clearance in the engine bay.

Fly-By-Wire fully electronic servo motor controls with no cables or capillary tube to route

Infinite just-right-temperature air blending

Infinite blower fan speed adjustment

High-volume dehumidified defrost mode

Separate high-capacity aluminum plate & fin cooling coil

High-Capacity parallel-flow heater coil

Mounts behind the dash

Includes new bolt-in, LED backlit control panel

Stamped steel firewall cover panel

Steel firewall water drip tray

Replacement steel glove box (reduced capacity)

This complete kit fits 1986-87 Grand National models with factory air.

NOTES:1. Some installations may require additional engine pulleys not included with kits. You must provide pulleys, V-belts, heater hoses and refrigerant.2. SureFit™ systems may interfere with some OEM radios or in-dash speakers.3. Vintage Air recommends using our heavy-duty fan blade and a fan shroud.